en English
Welcome to Oton Knowledge Base
< All Topics
Print

How to Record Program Video?

Step 1 – Plug in a USB drive to the USB port of the switcher

Step 2 – Configure the recording resolution, protocol, bitrate etc at device web page

Step 3 – Press REC button on the panel control to enable recording function(light in orange color)

Step 4 – Start recording,  you can view the recording status on multiview screen.recorded playback will be stored in the save folder of USB drive

Note:

1.supported USB drive Format: FAT32,NTSF, EXFAT
2.Please make sure the capacity of your USB drive is larger than 1GB, it will stop recording when the capacity is less than 300MB
3.10 minutes per recording fragment, please contact supplier if you want to revise the duration.
4.Please don’t unplug the USB drive until the recording duration counter turns from red color to gray(about 10s), on multiview monitor.

Table of Contents

Need Help?

We are Here To Assist You

Feel free to contact us, and we will be more than happy to answer all of your questions.